Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

DDRC-24 Dirac Live after Audyssey 3 years 4 weeks ago #37586

  • audiocrazy
  • audiocrazy's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 5
  • Thank you received: 0
I want to run Dirac Live for dual subwoofers only after I have calibrated my Marantz AV7704 processor with Audyssey XT32.

Here is how I connect
AV7704 Sub out 1 & 2 => Input 1 & 2 DDRC-24=> Output 1 to Sub1 and Output 2 to Sub2
I set a Xover of 80hz in Out1&2 linked together.

The problem is when I run Dirac the signal is not sent from my AVR but from MiniDsp. Its BYPASSING my AVR so Dirac calibration is not compensating for Audssyey correction.

Is there a way to accomplish this? If not what's the best way to use Dirac and Audyssey together in this setup.

Please Log in or Create an account to join the conversation.

DDRC-24 Dirac Live after Audyssey 3 years 1 week ago #37763

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Administrator
  • Posts: 8903
  • Thank you received: 1261
@ audiocrazy

Well the chain is Marantz (doing audissey) -> DDRC-24 (generating test tones and dirac processing ) - > SUB.
So it's indeed hard for the test tone to pass Audissey being downstream.. :-)

Maybe put the DDRC-24 as an input to your marantz?

DevTeam
miniDSP, building a DSP community one board at a time.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam