TOPIC:

I’ve just got a DDRC-22D and would like to insert it into the system with no correction filters; i.e., unit will just act as a digital switch. Then, when time permits, go through the measurement process. Is this possible and, if so, how? Thanks in advance for the help

You can set it up including filters and just turn on and off DiracLive correction.

pstrisik wrote:

You can set it up including filters and just turn on and off DiracLive correction.

Does that mean that I need to go through the measurement process and then turn off DiracLive correction? (I'd be hoping to install the unit and set in pass-through mode until there is a time when I can muck around with the measurements.)

I wouldn't think so. If you install it physically, just make sure DL is off and it should be functioning with pass through. You might go ahead and connect to it with the DDRC utility and look at the settings. I'm not sure about the gain setting - what is unity? Max it out when not using filters?

Experts, correct me if I'm wrong.

I'd have thought it would work if you just do a reset to defaults. @zydeco you could just try it?

john.reekie wrote:

I'd have thought it would work if you just do a reset to defaults. @zydeco you could just try it?

Yes, it worked. All a bit strange as I'd tried this earlier but, redoing all the interconnects, returning the DDRC-2D to defaults and then playing music worked.