|
Welcome,
Guest
|
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!
If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
TOPIC:
DDRC-22D 7 years 5 months ago #24867
|
|
Please Log in or Create an account to join the conversation. |
DDRC-22D 7 years 5 months ago #24924
|
@ Mogulman
That 6dB loss is indeed required as "headroom" for Dirac Live processing. There is a way to remove it (using the DDRC-22 utility) but to be honest, it's not really recommended. If you use the target curve, you're going to need to boost the signal, on a 22D (already very optimized), we need headroom. 24bit in, 24bit out, it's no magic that "somewhere" in the chain we need to lower the signal to be able to boost it at places where you may have some room modes, boost of signal.. Does this make sense? Simple catch up of level at the amplifier and you'll be all good.  DevTeam miniDSP, building a DSP community one board at a time.
For any official support, please contact our technical support team directly @ support.minidsp.com/support/home |
|
Please Log in or Create an account to join the conversation. |
Moderators: devteam