Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Static POP sounds 5 years 5 months ago #23658

  • JONTRE
  • JONTRE's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 21
  • Thank you received: 1
Hello,

I´ve just started up my new miniDSP DDRC-88A, almost emediately it started to coming poping sounds from the speakers. That sounded so bad that actually turned of directly again. The popping sounds coming every 20-30 seconds. Before I installed the unit I measured so that the polarity etc. is right in the contacts. Anyone know what might cause this?


EDIT: Running balanced connections for everything, but I tried with unbalanced for L,C,R only the rest is disconnected and suddenly I cant play the test sounds, a windows pops up and saying "Play Error: Play Stimulus Failed"

BR
JONTRE

Please Log in or Create an account to join the conversation.

Last edit: by JONTRE.

Static POP sounds 5 years 5 months ago #23659

  • rts100x5
  • rts100x5's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 185
  • Thank you received: 38
Tell us more about how your unit is connected to your system...

Try a new USB cable ...shorter is better ... no longer than 5 ft
The following user(s) said Thank You: JONTRE

Please Log in or Create an account to join the conversation.

Last edit: by rts100x5.

Static POP sounds 5 years 5 months ago #23672

  • JONTRE
  • JONTRE's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 21
  • Thank you received: 1

Tell us more about how your unit is connected to your system...

Try a new USB cable ...shorter is better ... no longer than 5 ft


I actually used a extension cable + original cable to connect to the minidsp. It seems like that was the problem. When connecting only with the short original cable I got no pops. :woohoo:

Please Log in or Create an account to join the conversation.

Static POP sounds 5 years 5 months ago #23673

  • rts100x5
  • rts100x5's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 185
  • Thank you received: 38
Yes I had the same issues with a NANO AVR DL un ti l I tried a short USB cable. I really dont understand the design incompatability... I have other devices that use 15ft + USB cables.....

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam