Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

Wi-DG with CDSP8x12 v2 3 years 1 month ago #47819

lynncv74 Topic Author Offline New Member Posts: 2 Thank you received: 0	How does the Wi-DG power and connect to the CDSP8x12 v2? Do I need a mini usb to type B usb2.0 cable? Neither the CDSP8x12v2 or Wi-DG came with the correct cable to connect to one another? Just received my order and confused..
	Please Log in or Create an account to join the conversation. Last edit: by lynncv74.

Wi-DG with CDSP8x12 v2 2 years 6 months ago #51467

[email protected] Offline New Member Posts: 3 Thank you received: 1	I believe it requires USB C stand alone power, the dsp cannot power the wifi and allow control
	Please Log in or Create an account to join the conversation.

Wi-DG with CDSP8x12 v2 2 years 6 months ago #51495

subterFUSE
Offline
Junior Member
Posts: 25
Thank you received: 0

I don't recommend installing the Wi-Fi module with the CDSP. We installed mine and had to remove it because it caused major noise problems in the system. The USB ports of the miniDSP are very sensitive to ground loops and anything plugged in to the USB port that has its own power supply causes noise.

I can't even tune my CDSP with my laptop connected to wall power or else I get ground loops. Disconnect the laptop power cable, noise goes away.

Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

CDSP series

Wi-DG with CDSP8x12 v2