Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

CDSP 8x12 DL Wired & IR remote communication 4 years 1 month ago #43366

  • rccotroneo
  • rccotroneo's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 92
  • Thank you received: 12
Can the IR remote be used without the wired remote connected?

Or, is the IR receiver built into the wired remote which needs to be connected in order for the IR remote to work?

Please Log in or Create an account to join the conversation.

CDSP 8x12 DL Wired & IR remote communication 4 years 1 month ago #43601

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 9177
  • Thank you received: 1485
@rccotroneo

IR remote will only work with the remote control (where IR receiver is) connected.

Devteam
miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

CDSP 8x12 DL Wired & IR remote communication 3 years 9 months ago #45613

  • rsqt
  • rsqt's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 12
  • Thank you received: 0
Is there a way to control two 8x12?
Maybe using WI-DG and App.
I use them in my full active home cinema.
Thanks

Please Log in or Create an account to join the conversation.

Last edit: by rsqt.

CDSP 8x12 DL Wired & IR remote communication 3 years 8 months ago #45815

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 9177
  • Thank you received: 1485
@rsqt

I guess that you could use 2 x WIDG and use the IP box field to connect to one unit and then connect to the other unit?
That would do the trick I guess... Not super easy though.. :-(

DevTeam
miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

CDSP 8x12 DL Wired & IR remote communication 3 years 8 months ago #46046

  • rsqt
  • rsqt's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 12
  • Thank you received: 0
Thanks.
So it could be possible to use even more than 2 C-DSPs.

And if I want to use one C-DSP only for a 2-way DBA (double bass array), ist it possible to use all the taps for the range up to 150Hz on 4 output channels? Or is there only a certain amount of taps for each channel possible?

Nice weekend
Ralf

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam