16 channels amplifier, Powered by IcePower technology, 400w total, 1RU
1,099 USD
  • Description
  • Specifications
  • Support
  • Application Notes
  • Reviews

The miniDSP PWR-16 is a 400 Watt ultra-compact, highly-efficient audio power amplifier intended for multizone custom installations in modern homes, multi rooms, hotels, restaurants, bars, theatres, auditoriums, amusement parks, shopping malls etc. This amplifier is one of the lightest and most compact of its kind and excels with its impressive power-to-size ratio and its incredible power efficiency.

The PWR-16 features 16 channels of amplification by ICEpower® in eight zones. Each amplification channel can deliver peak power of 80W into a 4 ohm speaker. The two channels in a zone can be switched to BTL (bridge-tied load) mode to deliver peak power of 160W into an 8 ohm speaker. The result is an extremely flexible amplifier that can be used in many configurations.

A comprehensive set of control and protection features make the amplifier extremely flexible and robust. Remote enable, signal detection, and individu-al disabling of zones ensure minimum power consumption.


  • Powered by ICEpower® technology for 400W total power
  • 16 channels in 8 zone with each zone bridgeable
  • RCA analog inputs
  • Comprehensive controls of zone by GPIO

Product Downloads

What's in the Box?

  • 1 x PWR-ICE16 amplifier module
  • 1 x IEC power cord
Digital Signal Processor Engine -

Internal Processing resolution
& Sample rate


Input/Ouput Configuration

16 single-ended channel / 8 BTL channels zone 

Audio Input Connectivity

Unbalanced audio (RCA)

Audio Output Connectivity

8 BTL channels, or any combination
of SE and BTL via switches

Input / Output Max Levels

IN: 1Vrms
OUT: SE mode: Up to five channels driven: 80W per channel
All 16 channels driven: 25W per channel
(4 ohms, 0.1% THD+N, 20Hz < f < 20kHz, up to 80 seconds)
BTL mode: Two zones driven: 160W per zone
All zones driven: 50W per zone
(8 ohms, 0.1% THD+N, 20Hz < f < 20kHz, up to 80 seconds)

Input Impendance
47 kΩ
Output Impedance SE mode: 3 Ω / BTL mode: 6 Ω
Calibration Software -
Filtering Technology -
DSP Presets -
Dimensions 44 x 424 x 314 mm (1RU height, width 482 mm with rack ears)
Power 85-264 V AC, 45-65 Hz
Win/Mac Compatible
UMIK-1 Included
Bass Management
Room EQ Wizard Support

Application notes on PWR-16

 There are yet no application note for this product.

There are yet no reviews for this product.