PWR-DSP1Ultra High power single channel plate amplifier, DSP powered, universal mains
The PWR-DSP1 answers the needs for a high power yet high quality plate amplifier module. Based on the synergetic and innovative technology from DSP4YOU and PASCAL Audio, the module is a turnkey solution for multi-way powered speakers.
With an impressive maximum rating of 2400W (ch1), you can be sure to find no compromise on audio quality from this high end plate amplifier. Use it for studio/ Hifi systems or Pro-A/V applications and enjoy its passive cooling design with no fan. With our live amplifier health monitoring (load, temperature, clip), live changes of the DSP settings and ZeroConf support, the PWR-DSP series is a true Plug&Play device easily configured over Ethernet or Wifi networks: A setup summarized by three words: Plug, discover, control.
NOTE: The AVB option is currently unavailable due to lack of supply (End Of Life) of one of the chipset used for this purpose. Our team will update this page once the product gets AVB support again.
- Ultra high power module, Up to 2400W on channel 1, Passive cooling
- Regulated SMPS for 85 ~ 268V operation
- Embedded DSP technology (Crossover/Equalization/Comp&Lim/Audio and current monitoring...)
- Ethernet control via ZeroCONF (DHCP/AutoIP)
- OEM friendly
What's in the Box?
- 1 x PWR-DSP1 amplifier module
- 1 x CAT5 patch cable
- 3 x Molex connector with inserts for connectivity to speaker leads
- PowerCON 20A NAC3FCA - Required to provide power to the amplifier
- M4 T-Nuts to mount the amplifier with M4 screws to your enclosure
NOTE: The PWR-DSP1 is a heavy product which may require a different shipping quotation based on countries it is shipped to. Once the order placed, our team will contact you for an updated quotation on the final shipping cost.
I have tried this on a Tc sound 15 lms-r for a few weeks and feel very satisfied. Although that is a .Borgar Haug
Since I use it in my home cinema I miss the opportunity to put it in auto standby mode.
Minidsp has given good and quick responses to my questions and the quality feel of the product is very good.
I have only had the amplifier for a few days but I am impressed. It has the same class d technology used in many Camco amplifiers. The DSP works well and the interface using a laptop is easy.\r\nThe clean power output is quite staggering. It is replacing a Crown CE4000 amp that puts out 3600w bridged into 4 ohms. It seems to perform very similar, albeit with less weight and bulk. I have mounted it in one of my 18 inch subs, and I can then connect another sub up using a number lead. It absolutely thumps and can max out my subs before there is any sight of limiting. I have set the limiter at -6am for protection and clean headroom. All in all a great package. Very well built and high quality components.Greg Nissley