nanoAVR HDAHDMI Audio processor and 2x1 HDMI switch + 8 analog out, USB and Ethernet control, up to 7.1 processing
The miniDSP nanoAVR HDA is a high-resolution 8-channel digital audio processor combined with a 2x1 HDMI audio and video switch and 8-channel D/A convertor. The floating-point SHARC digital signal processor (DSP) at the core of the nanoAVR HDA 8 channels of uncompressed audio over HDMI (Linear PCM) and provides the processed output over both HDMI and through eight RCA analog connectors.
The onboard audio processing is accessed via miniDSP's powerful and friendly user interface. Channel routing, powerful and flexible bass management, independent crossovers and 10 bands of parametric equalization on every channel, time alignment... from tuning a subwoofer to time-aligning and equalizing a full 7.1 system, this diminutive processor provides all the audio processing flexibility our brand is known for.
The user-friendly PC/Mac software allows real time configuration of the nanoAVR HDA via USB (short distance) or over Ethernet (LAN). Combine with 3rd-party software like Room EQ Wizard and a miniDSP UMIK-1 USB measurement microphone to measure and tune all channels of a home theater or multi-channel audio system. Once configured, all settings are stored and can be selected from the front panel, infrared remote, or Android & iOS app.
- Processor: 32-bit floating-point Analog Devices SHARC DSP
- Input / Output resolution: 24 bits
- Channel count: 8 in, 8 out
- Maximum Input sample rate: 216 kHz
- Internal operating sample rate: 96 kHz
- Output sample rate: 96 kHz
and therefore only accepts linear PCM (LPCM) audio streams. Please make sure
What's in the box?
- 1 x nanoAVR HDA DSP unit
- 1 x USB 2.0 cable (1.5m)
- 1 x Ethernet cable (1m)
- 1 x HDMI v1.4 flat cable (1.5m)
- 1 x 5V DC power supply with 4 plugs
- 1 x Plug-in
- Free Android App for control
- Free iOS App for control via iPhone/iPad
UMIK-1, unique calibration file mircophone for accurate acoustic measurements
|Digital Signal Processor Engine||Floating-point Analog Devices SHARC DSP|
Internal Processing resolution
32-bit / 96kHz
8 in / 8 out
Audio Input Connectivity
2 x HDMI 1.4a
Audio Output Connectivity
1 x HDMI 1.4a
Input / Output Max Levels
|Output Impedance||560 Ω|
|Calibration Software||nanoAVR plugin|
|DSP Presets||Up to 4 presets|
|Dimensions||46 x 161 x 200 mm|
|Power||External 5V supply|
|Impulse Response Correction||✘|
|Infrared Remote Learning||✔|
|Room EQ Wizard Support||✔|
Application notes on nanoAVR HDA
In this app note we will show you how to equalize all channels of your home theater system using the miniDSP nanoAVR. Before starting on this app note, you will need to connect the nanoAVR into your system and ensure that it is working correctly. To do so, please read through the User Manual.
In this app note we will show you how to perform bass management with the nanoAVR and the nanoAVR_BM bass management plugin. Before starting on this app note, you will need to have connected the nanoAVR into your system and equalized each output channel following the app note Equalizing your home theater system with the nanoAVR and UMIK-1.