Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

ADAT Channels, Tascam Mixer 5 months 1 week ago #61651

  • dmswe
  • dmswe's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0
Hello

Im using a MacMini M1 and the USBStreamer presents its ADAT Channels perfectly to the OS. Im checking in the Audio and Midi Settings of the OS. I can also get a signal using Logic on channel (1). But its a mix, I have programmed the DM-24 mixer to send on Channel 1,2 and 3,4 but i just get audio on the first ADAT channel (1). Do you have any suggestions?

I have used both as clock source with same results, unit is plugged directly into the mac.

/Daniel

Please Log in or Create an account to join the conversation.

ADAT Channels, Tascam Mixer 5 months 1 week ago #61656

  • dmswe
  • dmswe's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0
I figured it out, its was a bad conf in the Tascam, works perfectly now.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam