Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: Current on PIN 11-12 J2

Current on PIN 11-12 J2 2 years 11 months ago #33837

  • sdmorvan
  • sdmorvan's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Dear all,
Probably by mistake, I connected J2 pin 12 to a 5V supply AND pin 11 on J2 (GND) .
Probably I flew something around 0.5/0.6 A inside the board.
After a while, the unit switched off.

Now, I have removed all connections in pin 11 and 12, but when I connect the usb streamer to USB, it turns on, then works for 20 sec, then heats and turns down.

1. Do you confirm I cannot drive any current through pin 11/12
2. Any possibility to repair the unit?

Thanks!
Simone
The administrator has disabled public write access.

Current on PIN 11-12 J2 2 years 11 months ago #34032

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 8764
  • Thank you received: 1155
  • Karma: 165
@ Simone

I believe that you already have a tech support tix opened with our team. If so, best to use one path of communication and just keep communicating with them directly. Thanks!
Devteam
miniDSP, building a DSP community one board at a time.
The administrator has disabled public write access.
Moderators: devteam