Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: USBStreamer B : Adat to USB ?

USBStreamer B : Adat to USB ? 3 years 7 months ago #30476

  • Daniquito
  • Daniquito's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 1
  • Karma: 0
Hi, sorry if the question has been posted before but from I understand, the USBStreamer B transfers audio from USB to Adat, but is it also possible to use the USBStreamer B in order to transfer Adat to USB ? (in both ways)
Thanks for help.
Last Edit: 3 years 7 months ago by Daniquito.
The administrator has disabled public write access.

USBStreamer B : Adat to USB ? 3 years 7 months ago #30535

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 8757
  • Thank you received: 1140
  • Karma: 163
@ Daniquito

Yes, it indeed does "bidirectionnal". i.e. USB to ADAT and ADAT to USB.

Devteam
miniDSP, building a DSP community one board at a time.
The administrator has disabled public write access.

USBStreamer B : Adat to USB ? 3 years 7 months ago #30545

  • Daniquito
  • Daniquito's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 1
  • Karma: 0
Thanks for your reply, which Adat output (1-2,... 7-8) will be routed to input USB on Mac ?
Thanks for your help.
The administrator has disabled public write access.

USBStreamer B : Adat to USB ? 3 years 7 months ago #30567

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3775
  • Thank you received: 1586
  • Karma: 140
Hi, I think the USB interface will see all 8 ADAT channels. You would need to use a DAW or similar that "understands" multichannel input. (Same as with any other multichannel input device, I think.)

HTH :)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

USBStreamer B : Adat to USB ? 3 years 7 months ago #30619

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 8757
  • Thank you received: 1140
  • Karma: 163
@ Daniquito

I'm not sure to understand that question: "which Adat output (1-2,... 7-8) will be routed to input USB on Mac ?" :-)
All inputs will be showing up in the OSx.

DevTeam
miniDSP, building a DSP community one board at a time.
The administrator has disabled public write access.

USBStreamer B : Adat to USB ? 3 years 7 months ago #30624

  • Daniquito
  • Daniquito's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 1
  • Karma: 0
@devteam
I tried to know if connecting 1-2 or 7-8 (e.g) on my adat RME device will be shown in main output on USB mac, but your reply seems to be clear enough saying that all inputs will be showing up in the OSx regardless of which input has been injected.
Thanks
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

USBStreamer B : Adat to USB ? 3 years 7 months ago #30669

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 8757
  • Thank you received: 1140
  • Karma: 163
@ Daniquito

That's correct, the USBSTreamer will show up as an 8ch device in your OSx. It's the task of your DAW/recording software to select the channels you want to record as John already hinted.

DevTeam
miniDSP, building a DSP community one board at a time.
The administrator has disabled public write access.

USBStreamer B : Adat to USB ? 5 months 3 weeks ago #47400

  • Daniquito
  • Daniquito's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 1
  • Karma: 0
Hi, I'm coming back after a long time :-)
I'm planning to use USBStreamer B with OBS (streaming software) and I would like to know if once the device plugged, my mac will be able to see the compliant driver as an input (no output), so I will be able to use in OBS.
- Is it in stock now and how long will it take to ship in France ?
Thanks
Last Edit: 5 months 3 weeks ago by Daniquito.
The administrator has disabled public write access.
Moderators: devteam