Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Voice activated detection (VAD) parameter settings

Voice activated detection (VAD) parameter settings 10 months 2 weeks ago #39034

  • YukChow
  • YukChow's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 8
  • Karma: 0

I am testing a uma-8 v1 for my voice-based chatbot.
The default setting of the VAD parameters on the board booted up are given in below (also see the attachment vad_settings.png)

VAD Detect Time: 25000
VAD Timeout: 2000
VAD Threshold Enter: 2
VAD Threshold Exit: 50

Can anyone provide some guideline on setting these parameters? For my application, only some short utterances are needed.

Also, in the uma-8 user manual indicates that the default value of VAD Detect Time is 2 samples which equivalent to the attack time before VAD is enabled. What is this mean? Please advise, thanks.

This message has an attachment image.
Please log in or register to see it.

The administrator has disabled public write access.
Moderators: devteam