Welcome, Guest

NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community.

TOPIC: UMA-8: Use SW3 to fix the beam direction manually

UMA-8: Use SW3 to fix the beam direction manually 3 months 3 weeks ago #39018

YukChow Offline Fresh Boarder Posts: 8 Karma: 0	Can anyone help to clarify the followings? 1. It looks like that for me use the SW3 to fix the beam direction, I need to disable the VAD function first. Is this correct? 2. How do I remove the fix beam direction? I am using UMA-8 v1.
	The administrator has disabled public write access.

UMA-8: Use SW3 to fix the beam direction manually 3 months 1 week ago #39204

devteam Offline Administrator Posts: 8116 Thank you received: 952 Karma: 150	@YukChow If you're using v1. you should indeed be able to control the direction as per v1 user manual. You indeed need to stop Voice detection as you're going manual in that case. www.minidsp.com/images/documents/UMA-8%20User%20Manual.pdf DevTeam
	MiniDSP, building a DIY DSP community one board at a time. Last Edit: 3 months 1 week ago by devteam. The administrator has disabled public write access. The following user(s) said Thank You: YukChow

Moderators: devteam

Forum

Community Support

USB Mic Array

UMA-8: Use SW3 to fix the beam direction manually

Time to create page: 0.106 seconds