Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: No audio input/output on Windows 10

No audio input/output on Windows 10 4 months 2 weeks ago #36730

  • nsquared
  • nsquared's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
Hi all,

I have installed the UAC2 v4.11.0 windows drivers, mic array plugin and the XMOS firmware. The mic array firmware is able to connect to the board, and the board is recognised as a speaker and recording device in windows, but does not show any noise levels from the microphone or playback from the 'Sound' panel. Nothing shows on the 'Sound Location' tab on the mic-array firmware either, but the board will show the DOA of sound on the LED's.

I am not sure if I have missed a step but any support with this issue would be greatly appreciated.
The administrator has disabled public write access.

No audio input/output on Windows 10 3 months 3 weeks ago #36931

  • ponots
  • ponots's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
I also have the same issue. I am not able to record anything on windows10 using the miniDSP mic.

Device : UMA-8 USB mic array - V2.0
OS : Windows 10 Pro for workstations
Driver installed : micArray_VF_RAW_v1.0.zip
The administrator has disabled public write access.

No audio input/output on Windows 10 3 months 3 weeks ago #37014

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 7727
  • Thank you received: 897
  • Karma: 150
Dear both

Just to clarify, if your PCB says "rev0.6", you have a rev2 board. Please make sure to upgrade the firmware to the rev2 firmware loaded on the user downloads section. The correct firmware to be loaded is called "micArray_vf_spk_v1.0_up.bin"

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

No audio input/output on Windows 10 2 months 3 weeks ago #37518

  • vntana
  • vntana's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
I'm still having this issue with my UMA-8, I downloadedthis driver for my Win10: miniDSP_UAC2_v4.11.0_2017-06-19_setup.exe and upgraded to this firmware: micArray_xvsm_v1.5_Up.bin . I can see that the recording device is picking up audio, but when i connect it to the micarray, it doesn't show sound location nor does it blink the mic leds
The administrator has disabled public write access.
Moderators: devteam
Time to create page: 0.104 seconds