Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Select sample rate with RAW firmware

Select sample rate with RAW firmware 6 days 4 hours ago #35112

  • david93zgz
  • david93zgz's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
Hi,

I'm using the RAW firmware to record the signals of the 7 mics using Audacity in a Windows PC. I can increase the sample rate of the Audacity project but the signal bandwidth is still limited to 5Khz, so the UMA is still sampling at 11,025Hz. The user manual says "Sample rates are available as 11.2/16/32/44.1/48kHz" for the RAW firmware but in the miniDSP UAC2 Control Panel the Current Sample Rate is fixed at 11,025Hz. How can I change it?

Thanks.
The administrator has disabled public write access.

Select sample rate with RAW firmware 1 day 4 hours ago #35204

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 7084
  • Thank you received: 748
  • Karma: 135
@ david93zgz

Sample rate is configured by the project you define under your ASIO powered software. (ie. when you start the project, it will force the recording to that sample rate). Is audacity able to support ASIO? I didn't know it was the case... maybe they changed?

Make sure that a)you're using miniDSP's ASIO driver b) you're using a software able to support ASIO.

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
The following user(s) said Thank You: david93zgz

Select sample rate with RAW firmware 1 day 4 hours ago #35212

  • david93zgz
  • david93zgz's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
I tried with a ASIO compatible software (Cubase) and it works fine.

Thanks!
The administrator has disabled public write access.
Time to create page: 0.075 seconds