Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Extended API

Extended API 10 months 2 weeks ago #34943

  • ugocupcic
  • ugocupcic's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
Hi,

I've developed some C# driver based on the API described on page 24 and 25 of the user manual.

I was wondering whether I could have access to the rest of the API? In the manual I can only get the DOA, set the DOA (for the beam forming) and turn on or off the DOA. Would it also be possible to set the AGC, Gain, etc... through the HID USB protocol?

Cheers,

Ugo
The administrator has disabled public write access.

Extended API 10 months 1 week ago #35002

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 7884
  • Thank you received: 919
  • Karma: 149
@ Ugo

Unfortunately not plans for now to update this. It would require quite a lot of doc (and support) to control all these settings so for now, our engineering team decided to limit the amount of support request we're already getting for duplicating all our GUI into 3rd party drivers.. These settings are typically one off and therefore shouldn't need constant config.. Feel free maybe to contact us if specific question?

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

Extended API 10 months 1 week ago #35016

  • ugocupcic
  • ugocupcic's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
OK thanks. I've used Wireshark to sniff most of the functionalities I needed (setting autogain, BF focus etc...).
The administrator has disabled public write access.
Moderators: devteam
Time to create page: 0.107 seconds