Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: VAD setting explanation

VAD setting explanation 4 months 1 week ago #33210

  • ns1234
  • ns1234's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Can someone please explain these settings?

VAD Detect Time
VAD Timeout
VAD Threshold Enter
VAD Threshold Exit

The PDF says VAD Detect Time defaults to 2 and timeout to 50, however I see 4000 and 2000 for those and 2 and 50 for enter and exit. Enter and exit aren't mentioned in the PDF at all!
The administrator has disabled public write access.

VAD setting explanation 4 months 1 week ago #33212

  • ns1234
  • ns1234's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
I guess VAD is only relevant for DOA? DOA isn't important for me. What I want is to improve accuracy for giving voice commands to control lights, etc. Are the default setting ideal for that? Is there a guide or something on how I can adjust settings for my specific environment?
The administrator has disabled public write access.

VAD setting explanation 2 months 2 weeks ago #34042

  • ns1234
  • ns1234's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Hello? Is anybody home? I bought your $100 microphone, would be cool to have some answers on how to use it. :(
The administrator has disabled public write access.

VAD setting explanation 2 months 2 weeks ago #34058

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 7084
  • Thank you received: 748
  • Karma: 135
@ ns1234

Sorry for missing this post. Remember that this is a "community powered forum" (as explained above all sections of forum). Our team can always help by starting a tech support support ticket (support.minidsp.com) if any specific/urgent question. Thanks!

These settings shouldn't require much tuning unless you have a specific application. It's for Voice Activity Detection to help for Voice to Speech detection (i.e. start recording). Check out the latest plugin/firmware online. It has solved some bugs. You shouldn't have to tune any of these settings to get a simple setup as yourself. DOA (Direction of arrival) are related VAD but not the same.

Devteam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.101 seconds