Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: stereo features to be implemented in the RAW mode?

stereo features to be implemented in the RAW mode? 1 month 3 weeks ago #32490

  • muser37
  • muser37's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
Hi! I'm having fun with your array. I was wondering if you have any intention of adding the features in stereo mode i.e beam forming etc. into the RAW mode? It seems I needs those for my project to work...

Hopeful
The administrator has disabled public write access.

stereo features to be implemented in the RAW mode? 1 month 3 weeks ago #32491

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2689
  • Thank you received: 1097
  • Karma: 110
I could be wrong, but isn't the whole point of RAW mode that there is no processing on the mic(s) signal?
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

stereo features to be implemented in the RAW mode? 1 month 3 weeks ago #32492

  • muser37
  • muser37's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
I guess I should have been more clear. I'm under the impression I can't use the plug in in RAW mode right? only in stereo mode? The plugin has lots of useful signal processing that I can't use with all 7 mics right? Only in stereo? Why is this? I know you can beamform arrays as well as add gain, compression EQ filters etc. Why limit the 7 mics to just RAW mode?
The administrator has disabled public write access.
Time to create page: 0.105 seconds