Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: UMA-8 XMOS JTAG connector

UMA-8 XMOS JTAG connector 2 weeks 3 days ago #32148

  • DomoLogo
  • DomoLogo's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
I'm trying to get information about how I can replace the UMA-8 mic array signal processing with my own as direct access to the 8ch of microphones is not currently available.

Looking at the spec sheet it would appear that there is a JTAG connector "for custom code." Is this something I would be able to utilize, if so how? Assuming that it would require utilizing the XMOS dev kit.
The administrator has disabled public write access.

UMA-8 XMOS JTAG connector 2 weeks 2 days ago #32168

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5648
  • Thank you received: 692
  • Karma: 130
@ DomoLogo,

Good news! The raw mode firmware is now available. Simple firmware upgrade of the xmos as per user manual. Please check out the user downloads section. It's all there!

There is indeed a JTAG port but so far don't have a release time for JTAG + XMOS.

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.085 seconds