Welcome, Guest
Username: Password: Remember me
Here is the place to share your questions/comments about your setup of the UMIK-1 USB measurement microphone


NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: Mount adapter for UMIK-1

Mount adapter for UMIK-1 5 years 7 months ago #13163

  • Tbus
  • Tbus's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
I just bought a UMIK-1 and the stand I bought for it was a Euro Boom MS7701. The threads on the boom stand look to be 3/4 inch where the mic would attach. The UMIK-1 is obviously much smaller. Does anyone know of an adapter or an actual mic holder I can use that will fit the UMIK-1?
The administrator has disabled public write access.

Mount adapter for UMIK-1 5 years 7 months ago #13166

  • engkirk
  • engkirk's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Thank you received: 3
  • Karma: 1
I think if you look at the mount that comes with the UMIK-1 you will see a female adapter (threaded sleeve) that can be unscrewed from out of the bottom of the clip mount. If you unscrew this the female end of the mount becomes larger (obviously) then into this larger threaded area you might be able to attach one of the male threaded ends of your MS7701.
The administrator has disabled public write access.
The following user(s) said Thank You: devteam, Tbus

Mount adapter for UMIK-1 5 years 7 months ago #13175

  • Tbus
  • Tbus's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
that worked great, thanks so much!
The administrator has disabled public write access.

Mount adapter for UMIK-1 5 years 7 months ago #13179

  • engkirk
  • engkirk's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Thank you received: 3
  • Karma: 1
Glad I could help.
The administrator has disabled public write access.

Mount adapter for UMIK-1 1 year 10 months ago #34443

  • mdanderson
  • mdanderson's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
engkirk wrote:
I think if you look at the mount that comes with the UMIK-1 you will see a female adapter (threaded sleeve) that can be unscrewed from out of the bottom of the clip mount. If you unscrew this the female end of the mount becomes larger (obviously) then into this larger threaded area you might be able to attach one of the male threaded ends of your MS7701.

Worked for me as well with my particular boom stand. Thanks.
The administrator has disabled public write access.
Moderators: devteam