Welcome, Guest
Username: Password: Remember me
Here is the place to share your questions/comments about your setup of the UMIK-1 USB measurement microphone


NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

UMIK-1 typical phase response 4 years 9 months ago #35610

  • Ultrasonic
  • Ultrasonic's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 2290
  • Thank you received: 464
Is anyone able to share a typical example of the phase response of a UMIK-1, ideally with the associated amplitude response?

I've found an older thread referring to phase calibration data being supplied early on with the UMIK-1 so I know such data exists but I've yet to find an example.

Thanks.

Please Log in or Create an account to join the conversation.

Last edit: by Ultrasonic.

UMIK-1 typical phase response 4 years 9 months ago #35664

  • Ultrasonic
  • Ultrasonic's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 2290
  • Thank you received: 464
@devteam?

Please Log in or Create an account to join the conversation.

UMIK-1 typical phase response 4 years 9 months ago #35759

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 9136
  • Thank you received: 1426
@ Ultrasonic

unfortunately I'm afraid that we don't provide the phase data on our mics. Our friends at Cross spectrum do this being said..
Maybe worth to investigate if they can help to provide it?

DevTeam
miniDSP, building a DSP community one board at a time.

Please Log in or Create an account to join the conversation.

UMIK-1 typical phase response 4 years 9 months ago #35784

  • Ultrasonic
  • Ultrasonic's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 2290
  • Thank you received: 464

@ Ultrasonic

unfortunately I'm afraid that we don't provide the phase data on our mics. Our friends at Cross spectrum do this being said..
Maybe worth to investigate if they can help to provide it?

DevTeam


Thanks for your reply.

In the post below it was stated that the 'the offset is quite minor and consistant'. I was hoping you could share the sort of typical response that was measured on early UMIK-1s so that it would be possible to judge the significance?

www.minidsp.com/forum/minidsp-for-newbie...download-is-off#9552

Thanks.

Please Log in or Create an account to join the conversation.

UMIK-1 typical phase response 4 years 8 months ago #35832

  • PsyCLown
  • PsyCLown's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 14
  • Thank you received: 0
I'd be curious to find out how inaccurate the UMIK is when it comes to phase.

The Cross Spectrum UMIK is a lot more, especially when you take shipping into consideration and the fact that you are just ordering a mic through them and not DSP which can help and justify the shipping via MiniDSP.

Please Log in or Create an account to join the conversation.

UMIK-1 typical phase response 4 years 8 months ago #35927

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 9136
  • Thank you received: 1426
@ Psyclown/Ultrasonic

Unfortunately as mentioned above, we don't have that data for current mics. If you worry about this data, best is indeed to get the product directly from our Friends @ CrossSpectrum.. Sorry we don't have a magic answer to this.. :-(

DevTeam
miniDSP, building a DSP community one board at a time.

Please Log in or Create an account to join the conversation.

UMIK-1 typical phase response 4 years 8 months ago #35965

  • Ultrasonic
  • Ultrasonic's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 2290
  • Thank you received: 464

@ Psyclown/Ultrasonic

Unfortunately as mentioned above, we don't have that data for current mics. If you worry about this data, best is indeed to get the product directly from our Friends @ CrossSpectrum.. Sorry we don't have a magic answer to this.. :-(

DevTeam


Has the design of the microphone changed from that of the originals for which phase calibration data was provided?

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam