TOPIC:

Evening,

I recently purchased the 2x4 MiniDSP HD with the 2x4 MiniDSP HD Plugin and the Umik-1. I have my Denon 3700h AVR connected from one sub out to the input 1 (on the front) of the 2x4 MiniDSP HD in which I have two subs connected one to input 1 as well as the other to input 2 on the rear side (side with the four inputs). I ran REW and using the 2x4 MiniDSP was able to gain match as well as set up the subs with the eq. My issue is with the final step when I tried running Audyssey when it finally reached the Sub 1 to send it a test tone I received no sound. I checked all the wires and even plugged into the MiniDSP to see if I had any input volume and I did not. I was wondering from the Dev or community members if anyone can help me as I am totally baffled on why I am not getting any sound to my subs. Thanks and if needed any more information please let me know.

PS Subs both work fine when directly connected with AVR sub outs.

I figured it out, I needed to turn it back to analog from USB to get the sound out.