Welcome, Guest
Username: Password: Remember me
All tutorials related to sub tuning/eq/integration with other units.
  • Page:
  • 1

TOPIC:

Minidsp 2x4HD low volume issue with my subs connected 8 months 2 days ago #60785

  • MeekburnS
  • MeekburnS's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
Hello so I have my dual subs connected to my minidsp and the dsp connected to my AVR subwoofer connection. When I run audyssey room correction my subwoofer trim levels are around -3db with the gain on my subs set to about the 12 o’clock position, I want my sub trim levels to be around -10db but in order for me to get that I have to crank up the gain knob on my subs to almost max. Something is off either with my minidsp or a case of user error because when I take out the minidsp from the chain, I have to set my sub gain knobs back down to about the 11 o’clock position and that gets me to the trim levels I want to be at in my AVR… does anyone have any idea what might be causing this issue? Any help is very much appreciated, thanks 😊 

Please Log in or Create an account to join the conversation.

Minidsp 2x4HD low volume issue with my subs connected 2 weeks 2 hours ago #63818

  • Mr. Malbolgia
  • Mr. Malbolgia's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
Did you ever find a fix?  I have a 2X4HD that has had really low output since the latest firmware update.  I think I'm done with miniDSP products.
 

Please Log in or Create an account to join the conversation.

Minidsp 2x4HD low volume issue with my subs connected 1 week 6 days ago #63822

  • Ultrasonic
  • Ultrasonic's Avatar
  • Away
  • Platinum Member
  • Platinum Member
  • Posts: 2510
  • Thank you received: 517

Did you ever find a fix?  I have a 2X4HD that has had really low output since the latest firmware update.  I think I'm done with miniDSP products.

 

Contact miniDSP support if you haven't already. If nothing else they may be able to help you get back to a previous version of the firmware if this really was the issue, although it seems odd that it would be.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam