Welcome, Guest
Username: Password: Remember me
All tutorials related to sub tuning/eq/integration with other units.

TOPIC: Minisharc sub integration

Minisharc sub integration 8 months 4 days ago #30106

Hi, I'm new to the forum, so please be gentle.

I have a minisharc running in input slave with the minidac8 firmware and bclk +lrclk io reversed as subject of another post.

Input to minisharc is by toslink to i2s board and i2s outputs 1/2 feed a dac going to my valve amp and some satellite speakers. I2s output 3/4 goes to another dac feeding an active sub. Minisharc is working as a crossover and will have some room/system correction when I have time

The sound is good, but without running 2 cables to my sub is there any easy way to mix outputs 3/4 into mono so I get the bass from both channels?

I understand there won't be much stereo signal, but the level meters on output 3/4 are not exactly aligned.

Many thanks for any input
The administrator has disabled public write access.

Minisharc sub integration 8 months 4 days ago #30108

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2727
  • Thank you received: 1139
  • Karma: 114
Use the routing matrix?
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

Minisharc sub integration 8 months 4 days ago #30109

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2727
  • Thank you received: 1139
  • Karma: 114
As per the last screenshot in this app note:

www.minidsp.com/applications/digital-cro...s/stereo-34way-xover

I think that's what you're asking - ?
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam, Jeremywakeham

Minisharc sub integration 8 months 3 days ago #30162

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5848
  • Thank you received: 709
  • Karma: 132
@ Jeremywakeham

Did you figure it out? Send us a pic of your routing matrix. As John said, it's indeed all possible in the routing Matrix.

Devteam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

Minisharc sub integration 8 months 3 days ago #30167

Thanks all. Got it now.
The administrator has disabled public write access.
Time to create page: 0.095 seconds