Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Forum
Community Support
Software
Re:PEQ 2.1
Need help configuring your plug-ins? This is the place to ask the miniDSP community for help. Please read manual first to limit 101 questions.

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

PEQ 2.1 12 years 10 months ago #809

  • dirk.bruere
  • dirk.bruere's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 39
  • Thank you received: 0
I have tried the minidsp+digi combination in stereo mode with spdif and it works fine.
However, when I program it for a subwoofer, with cutoff at 112HZ and put it in mono mode I find that left and right are not mixed, and I only get left out of o/p1

According to the pdf it seems I should get left and right mixed and coming out of o/p1, and a mirror on o/p2. What's wrong?

Please Log in or Create an account to join the conversation.

Re:PEQ 2.1 12 years 10 months ago #815

  • dirk.bruere
  • dirk.bruere's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 39
  • Thank you received: 0
Is there a jumper that has to be set to enable mixed L+R on one of the outputs ( 1 and 2)? I am using SPDIF input on a digiboard

Please Log in or Create an account to join the conversation.

Re:PEQ 2.1 12 years 10 months ago #816

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 9161
  • Thank you received: 1460
Dirk,

No jumper required and works out of the box when doing toggling the system settings to mono. It works perfectly fine on our side in our current setup and for other members as you can see on this thread. So something else must be going on in your configuration. Here is the reminder of the configuration you should expect:
Low output on I2S_Data_Out1/2
Satellites available on I2S_Data_Out3/4

Why don 't you send our tech support team your configuration file to see what's going on. Please send it to This email address is being protected from spambots. You need JavaScript enabled to view it. along with a small diagram of your setup.

DevTeam

PS:
miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.
  • Page:
  • 1
Moderators: devteam
Forum
Community Support
Software
Re:PEQ 2.1