Welcome, Guest

Need help configuring your plug-ins? This is the place to ask the miniDSP community for help. Please read manual first to limit 101 questions.

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

Tried the loopback mode 11 years 9 months ago #4053

Ryssen Topic Author Offline Senior Member Posts: 59 Thank you received: 0	and thoght it sounded fine,but I missed that the volumecontroll stipped working.can this be fixed?
	Please Log in or Create an account to join the conversation.

Re: Tried the loopback mode 11 years 9 months ago #4063

devteam
Away
Administrator
Posts: 9173
Thank you received: 1480

Not sure what you mean by "loopback mode". Are you talking of the miniDIGI?
If you are, in a loopback mode you're essentially taking the SPDIF/Toslink input converted to I2S and rerouting that same I2S data (without any processing) directly to the SPDIF output.

So yes, volume control wouldn't work since loopback is just looping back without dSP. Please clarify what you mean by "loopback" if that didn't answer your question.

DevTeam

miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

Re: Tried the loopback mode 11 years 9 months ago #4069

Ryssen Topic Author Offline Senior Member Posts: 59 Thank you received: 0	Yes it´s the loopbackmmode described in the miniDIGI manual,so no volume or no EQ will work in that mode ten?
	Please Log in or Create an account to join the conversation.

Re: Tried the loopback mode 11 years 9 months ago #4070

devteam
Away
Administrator
Posts: 9173
Thank you received: 1480

Ryssen,

I'm not sure if you understood what we explained above about the loopback mode..
If you need SPDIF in + Processing (i.e. PEQ/Filter/Volume..etc), then you don't need to use the loopback mode. You just need to route your SPDIF out (using the correct jumper) to the I2S out from the DSP. See miniDIGI user manual for explanation.

The Loopback mode is really used as a test tool to test Digital In (e.g. SPDIF/Toslink) being "rerouted directly" to Digital output (SPDIF toslink) "within the miniDIGI. The Digital audio data (I2S) will NEVER reach the miniDSP stacked in that configuration.

Does this make a bit more sense? Please have a look at above explanation or miniDIGI manual section on I2S routing for more info.

DevTeam

miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Forum

Community Support

Software

Re: Tried the loopback mode