Welcome, Guest
Username: Password: Remember me
Need help configuring your plug-ins? This is the place to ask the miniDSP community for help. Please read manual first to limit 101 questions.

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

10x10HD Using Biquads doesn't give expected results 7 months 2 weeks ago #58397

  • jevansoh
  • jevansoh's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 32
  • Thank you received: 0
I'm trying to set up PEQ filters on my 10x10HD and have used both REW EQ and MSO to generate Biquads.

I've tried multiple times, both on different sub outputs and only on the input side, but whenever I export my results (which always show I should have a very even FR after EQ) the measured results I get are way off and even worse than before I started.

However, if I just manually enter the Frequency, Q, and Boost/Cut, the measured results always look close to what they should be.

In MSO, I've selected MiniDSP and have selected the 48khz option and in REW EQ I've selected the plain "MiniDSP" option for the EQ.

I don't see any settings in the 10x10HD that would appear to alter the way the Biquads are used or inputted into the system, but I obviously must be missing something.

I'm using one Input and Six outputs (six subs) and the routing is set up correctly and "Basic PEQ" settings that I enter manually give the expected results.

Any help would be much appreciated.

Please Log in or Create an account to join the conversation.

10x10HD Using Biquads doesn't give expected results 7 months 2 weeks ago #58445

  • Juoigâ
  • Juoigâ's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 258
  • Thank you received: 50
which plugin are you using?   the 10x10 runs at 48kHz, the 4x10 at 96kHz
www.minidsp.com/products/plugins/4x10-10x10-plug-ins

Please Log in or Create an account to join the conversation.

10x10HD Using Biquads doesn't give expected results 7 months 1 week ago #58541

  • jevansoh
  • jevansoh's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 32
  • Thank you received: 0
I'm using the 10x10 at 48khz.

Please Log in or Create an account to join the conversation.

10x10HD Using Biquads doesn't give expected results 7 months 1 week ago #58542

  • dreite
  • dreite's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1579
  • Thank you received: 709
How about posting your coefficients so we can examine????  :)

Dave.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam