|
Welcome,
Guest
|
Need help configuring your plug-ins? This is the place to ask the miniDSP community for help. Please read manual first to limit 101 questions.
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!
If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!
If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
TOPIC:
Bypassed result... 12 years 2 months ago #1641
|
Hallo!
Could anyone explain the result of this Bypass setting please? 
|
|
Please Log in or Create an account to join the conversation. |
Re:Bypassed result... 12 years 2 months ago #1642
|
And when changed :
Why is the filter configuration looking like it does? I dont understand the relation between bypass and the resulting output. /johan 
|
|
Please Log in or Create an account to join the conversation. |
Re:Bypassed result... 12 years 2 months ago #1643
|
With both Bypass button disabled, (not pressed in/not grey), you basically have both filters enabled.
I.e. you have a Low pass filter and High pass filter both at the same frequency! (400Hz) So indeed, it looks like something a bit odd since it's not something you would ever use in any real system..  Typically, you would only need the Low pass OR high pass.. In other words, at least one filter need to be bypassed. If you don't really know basics of filters (LPF/HPF), easiest is to not play with the bypass.. reset your config back to default and simply use the default configuration ( bypass correctly configured). You can then just change the cut off frequency. DevTeam. miniDSP, building a DSP community one board at a time.
|
|
Please Log in or Create an account to join the conversation. |
Moderators: devteam