Welcome, Guest
Username: Password: Remember me
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC:

SHD Update and Roon Ready Certification 7 months 6 days ago #54500

  • staki1966dsp
  • staki1966dsp's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Thank you received: 2
I doubt that the symptom you describe is caused by jitter. You probably have one of the units with the newer streamer version (www.minidsp.com/forum/shd-series/18512-n...sion-hardware-update). Did you purchase your SHD this year?

If the answer to the above is yes, then your issue has been noticed by others, they claim that it is happening only with high bit rate (> 44.1kHz) files. Check for example this ASR thread . I would open a ticket with miniDSP support.

I have an older hardware version with neo2 streamer and I don't have this issue.
The following user(s) said Thank You: daniellu

Please Log in or Create an account to join the conversation.

Last edit: by staki1966dsp.

SHD Update and Roon Ready Certification 7 months 5 days ago #54501

  • daniellu
  • daniellu's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 5
  • Thank you received: 0
Thank you for the information. Yes, I bought SHD studio a week ago :S, and received yesterday.
It seems I can hear the popping noise on my own CD ripped flac files too, (44.1), The reason I suspected those noise are jitters, because they are similar to the ones, occur when I tried to stream HD music through wifi, I can hear a lot of these popping noise. It proved not a good idea to use wifi.

Please Log in or Create an account to join the conversation.

Last edit: by daniellu.

SHD Update and Roon Ready Certification 7 months 5 days ago #54503

  • eisenb11
  • eisenb11's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 38
  • Thank you received: 4
Agreed, that’s different than jitter.

See RichB’s post here

Is the click and pop issue that he’s referring to your issue? It seems that they just came out with a new hardware revision of the SHD. May be in need of a firmware update?

Please Log in or Create an account to join the conversation.

SHD Update and Roon Ready Certification 7 months 2 days ago #54529

  • RichB
  • RichB's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 42
  • Thank you received: 9
The Roon bridge and (Roon Ready beta) have faint popping issues with source > 16 bit or > 44.1 kHz on the new SHD builds that use the NEO3 hardware. This hardware revision arrived in mid-January.

- Rich

Please Log in or Create an account to join the conversation.

SHD Update and Roon Ready Certification 7 months 2 days ago #54530

  • eisenb11
  • eisenb11's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 38
  • Thank you received: 4
Pure guessing - but I'm wondering if the SHD official Roon update is delayed while they sort out the issues with the newer SHD hardware - I can see how that could take priority over what we're waiting for as it would make sense for them to release it for all SHD versions at the same time.

Please Log in or Create an account to join the conversation.

SHD Update and Roon Ready Certification 7 months 2 days ago #54531

  • RichB
  • RichB's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 42
  • Thank you received: 9
Could be. Last I heard from them, there was a lot of work fully integrating the software.
I expect that integrating Volumio with custom features requires additional software expertise.

- Rich

Please Log in or Create an account to join the conversation.

SHD Update and Roon Ready Certification 6 months 4 weeks ago #54561

  • tryburn
  • tryburn's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 8
  • Thank you received: 1
I see the new firmware and Volumio updates for Roon compatibility have been posted. Which do I apply first -- the firmware or the Volumio update?? Thanks!

Please Log in or Create an account to join the conversation.

SHD Update and Roon Ready Certification 5 months 3 weeks ago #55125

  • petewilson
  • petewilson's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 3
  • Thank you received: 0
I’ve currently got a raspberry pi 4 with a usb2.0 output hooked to some $17 usb-spdif converter which has a toslink to my old dec 22d (which drives a pair of kii three active speakers); the Pi runs volumio and uses Roon bridge.

Roon bridge has volume control if I use it with the add on dac board but not via usb. Oh well.

My shd studio should arrive this afternoon. If Roon bridge on she studio causes problems, I’ll just stick the R Pi back in the chain and hook up to usb input on the Studio.

Non idéal, but should work...

Please Log in or Create an account to join the conversation.

SHD Update and Roon Ready Certification 5 months 3 weeks ago #55131

  • eisenb11
  • eisenb11's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 38
  • Thank you received: 4

I see the new firmware and Volumio updates for Roon compatibility have been posted. Which do I apply first -- the firmware or the Volumio update?? Thanks!


False alarm, and you got me all excited too! :laugh:

The last firmware I see if the minor update from march that preps for the Roon ready release?

Please Log in or Create an account to join the conversation.

SHD Update and Roon Ready Certification 5 months 3 weeks ago #55172

  • tryburn
  • tryburn's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 8
  • Thank you received: 1
Another false alarm -- Volumio 1.099 update for Roon certification??

Please Log in or Create an account to join the conversation.

SHD Update and Roon Ready Certification 3 weeks 6 days ago #57034

  • ccourtens
  • ccourtens's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
Maybe time to respond just by respect for your customers - no ??

Please Log in or Create an account to join the conversation.

SHD Update and Roon Ready Certification 3 weeks 6 days ago #57035

  • eisenb11
  • eisenb11's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 38
  • Thank you received: 4
Last post in the "roon stop support for uncertified devices" thread about a month ago:

"It's indeed a valid question to ask..  
- Unit been in the queue for 2month. We received the feedback for few issues. They are being worked out by the engineers. 3 of them being harder as they required modification of other parts of Volumio (upnp side/Volume control method). 
- Volumio team is on a break this month but we're hoping they can incorporate these changes in September. 
- We'll then send the updated firmware to the team. 

Devteam"

Given that, I guess Volumio folks are back from vacation and need to get to work now.

Please Log in or Create an account to join the conversation.

Last edit: by eisenb11.
Moderators: devteam