Welcome, Guest
Username: Password: Remember me
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: SHD as a 2ch mixer

SHD as a 2ch mixer 3 months 4 weeks ago #48731

  • viesis
  • viesis's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
1. Is it possible to mix/route those two balanced analog XLR inputs (inputXLR1=vocals and inputXLR2=guitar) to the XLR outputs while applying some panning effect i.e. outputXLR1=vocals+0.5guitar and outputXLR2=0.5vocals+guitar (via a power amplifier to speakers - live concert); outputXLR3=vocals and outputXLR4=guitar (via an external ADC to a DAW - recording)? Not entirely sure but (from the manual screenshot - attached as .png) it seems that it might be possible to assign both Dirac 1 (inputXLR1 with 0dB gain) and Dirac 2 (inputXLR2 with lower gain) to Output1!

2. What delay this would introduce to the outputs (input + output latency going from analog in to analog out, applying Dirac correction)?

PS. Have miniDSP thought of adding ADC recording (i.e. audio interface) functionality via USB to DAW? Could be used to record a small gig, vinyl, analyze audio, etc.
Attachments:
The administrator has disabled public write access.

SHD as a 2ch mixer 3 months 4 weeks ago #48735

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3775
  • Thank you received: 1586
  • Karma: 140
Sort of - the routing you want should work but if you're applying Dirac Live correction then that will affect outputs 3 and 4 as well, which is probably not what you want. It would be easier to use an external USB interface for the mixing and recording.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
Moderators: devteam