Welcome, Guest
Username: Password: Remember me
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: Dirac Live 2. presets lower in volume than the 1.

Dirac Live 2. presets lower in volume than the 1. 1 year 2 months ago #43897

  • gabrielegiudici
  • gabrielegiudici's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 15
  • Thank you received: 2
  • Karma: 0
I finally get my shd connected to the dirac live 2.0! I took the measures and uploaded the filters. I noticed that the volume is lower than in the dirac 1.0 presets, anyone noticed the same? Is it normal? When I turn ON/OFF the room correction with the Dirac 1.0 presets the volume remains almost the same, when I do it with the Dirac 2.0 presets the volume goes down a little bit
The administrator has disabled public write access.

Dirac Live 2. presets lower in volume than the 1. 1 year 2 months ago #43899

  • jaaptina
  • jaaptina's Avatar
  • Offline
  • Expert Boarder
  • Posts: 109
  • Thank you received: 37
  • Karma: 6
True. In my system when opening the measurement page volume goes down to - 80. When loading a existing profile volume goes down to - 20.
Last Edit: 1 year 2 months ago by jaaptina.
The administrator has disabled public write access.

Dirac Live 2. presets lower in volume than the 1. 1 year 1 month ago #44175

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 8767
  • Thank you received: 1156
  • Karma: 165
@gabrielegiudici

First I think that you guys are potentially talking of different things.. :-)
a) If you have Dirac1 (with a specific target/measurement on one slot) vs Dirac2 on a second slot, i find it extremely hard to see how you'd be able to have "100%" the same level... Both sets of measurements and target would be very different = having perceived different effect. You see what I mean?

b)as for the default level (when you drop a preset), it's default on Dirac2 to have master volume at -80 after you drop the filter. You need to manually raise it back

Devteam
miniDSP, building a DSP community one board at a time.
The administrator has disabled public write access.
Moderators: devteam