Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort!

If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us) as this is the official path for support by our team. Thanks a lot of your help in making a better community. :-)

TOPIC: Analogue inputs on the SHD

Analogue inputs on the SHD 4 months 3 weeks ago #37750

  • paul7777x
  • paul7777x's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 9
  • Karma: 0
Can anyone enlighten me as to the analogue inputs on the SHD please?

I know the manual says it’s possible to switch between the XLR and phono inputs, but I cannot find anything that states if they are both the same input or are entirely separate and independent of each other?

I’d be much obliged for a definitive answer if anyone knows.

Cheers.
The administrator has disabled public write access.

Analogue inputs on the SHD 4 months 2 weeks ago #37810

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 7931
  • Thank you received: 927
  • Karma: 149
@paul7777x

The analog inputs are indeed separate from each others. i.e. the ADC on the input is a 4ch ADC AK5574 (2ch for XLR in, 2ch for RCA in).

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

Analogue inputs on the SHD 4 months 1 week ago #37886

  • divertiti
  • divertiti's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Thank you received: 1
  • Karma: 0
devteam wrote:
@paul7777x

The analog inputs are indeed separate from each others. i.e. the ADC on the input is a 4ch ADC AK5574 (2ch for XLR in, 2ch for RCA in).

DevTeam

Is it possible to have an analog input, which goes through ADC then DSP, but then output it through digital spidif to an external DAC?
The administrator has disabled public write access.

Analogue inputs on the SHD 4 months 1 week ago #37889

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 7931
  • Thank you received: 927
  • Karma: 149
@divertiti

Sure, it's indeed possible. All the outputs are enabled. i.e. SPDIF 1&2 for OUT1/2/3/4 and Analog XLR, RCA.
They are all taking the output from the DSP processed. So you can indeed do analog in - DSP - SPDIF out.

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Moderators: devteam
Time to create page: 0.106 seconds