Welcome, Guest
Username: Password: Remember me

TOPIC: rePhase 0.9.9

rePhase 0.9.9 5 years 8 months ago #16880

  • pos
  • pos's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 350
  • Thank you received: 196
  • Karma: 39
rePhase 0.9.9 is out : sourceforge.net/projects/rephase/

What's new:
0.9.9 2014-12-10
    - shelving EQs with variable Q in Paragraphic EQ tab, with associated
      monotonic high and low shelv presets
    - centering can now be manually set to values in samples, percentage,
      time (us/ms/s) and distance (mm/cm/m).
      It is also possible to add or substract several values, for example
      "middle+270us"
    - new centering adjustment layout:
        * 'float' is now 'use closest perfect impulse' and is explicitely
          recommanded
        * 'int' is now 'round to closest sample'
        * 'use exact centring value' has been added for exact delays
    - 32 bits IEEE-754 float WAV output format added
    - output format noise floor is now shown in result curve
    - improved impulse and windowing symmetry, especially when an odd taps
      value is used
    - import/clear measurement file menu entries
    - fix partial installation catch
https//wavetracing.com | rephase.org
The administrator has disabled public write access.
The following user(s) said Thank You: devteam, dreite, curryman, dimike27

rePhase 0.9.9 5 years 8 months ago #16893

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 8750
  • Thank you received: 1125
  • Karma: 162
Nice! Keeping pushing some updates and neat improvements! Weather is getting cold in France? More time for dev I guess.. :-)

Thanks again for keeping this neat project going!
miniDSP, building a DSP community one board at a time.
The administrator has disabled public write access.

rePhase 0.9.9 5 years 8 months ago #16901

  • pos
  • pos's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 350
  • Thank you received: 196
  • Karma: 39
Hi Tony

Thanks :)
I really don't have much time for developing anymore, I have to code during the night now :D
But this update was long overdue and waiting to be published.

Most of the new features of this version and the former one (minimum-phase filters, shelving, manual impulse delay) were implemented to accommodate the M2 crossover project :silly:
https//wavetracing.com | rephase.org
The administrator has disabled public write access.

rePhase 0.9.9 5 years 8 months ago #16909

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 8750
  • Thank you received: 1125
  • Karma: 162
Very cool... Thanks again for the update! Look forward to getting a pair of M2 tested with the OpenDRC.. How is their return policy on Amazon? ;-)
miniDSP, building a DSP community one board at a time.
The administrator has disabled public write access.

rePhase 0.9.9 5 years 7 months ago #17109

  • F6HQZ
  • F6HQZ's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Karma: 0
Hi pos,

Thank you for this update of your so fabulous software..
But, sorry : I have something wrong here because your previous version was running ok in my laptop, but not the new version.
Only an uncomplete windows poping and closing fast. :-(
As I have not yet deleted the previous 0.9.8c, I can always launch this version.
Running on a Win7 64Bits SP1 in a Dell XPS L702X Intel [email protected] 2.2GHz 8GoRAM 64bits.

Thank you for any help or direction to point for more tests to resolve.

Best Regards,
Francois (France)
The administrator has disabled public write access.

rePhase 0.9.9 5 years 7 months ago #17111

  • pos
  • pos's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 350
  • Thank you received: 196
  • Karma: 39
Hi Francois

Thanks for the kind words.
The issue you are facing is probably due to an incomplete first run.
The first time you run a given version of rephase on a machine it will install a few things in your temp directory.
This might take some time, and unfortunately if you close it before it is fully installed it might fail to run from then on.
I have tried to avoid this situation, but apparently it still is a problem.

What you can do is to erase the files in your temporary directory (some software will do that for you, if you don't know were it is located, espcially since it is a hidden directory), and then restart rephase and let it install completely.
If you erase it yourself you can search for a directory starting with "par-" within your temp directory, and only erase this one.

Let me know if this worked for you, and if not we might try something else.

Regards
Thomas
https//wavetracing.com | rephase.org
The administrator has disabled public write access.
The following user(s) said Thank You: F6HQZ

rePhase 0.9.9 5 years 7 months ago #17112

  • F6HQZ
  • F6HQZ's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Karma: 0
Yep !
It's running now, thank you so much !
Deleted all temporary files and all is ok now.
Something was certainly wrong during the first launching, effectively.
Now, I can continue to play with my miniShark and tempt to upgrade my Yamaha RX-V575 with him.
You tool is very usefull and I read you on the french and english forums talking about rePhase and miniDSP from a while.
I appreciate your fast reply and I have a great pleasure to tell you thanks again for all your free and gentle help and knowledge sharing.

Best Regards,
Francois
The administrator has disabled public write access.
Moderators: devteam