Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Active 2 way

Active 2 way 2 years 1 month ago #32874

  • jonone
  • jonone's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
Hi I'm thinking of making an active 2 way with a pair of the 250w pwr ice amps.
I was thinking of using a compression driver for the tweeter.
So for a newbie question how do I limited the power for the tweeter as it needs only 80w where as the bass driver can handle 500w.
Sorry if it's obvious!
Will I have a problem with noise with a compression driver?
The administrator has disabled public write access.

Active 2 way 2 years 1 month ago #32933

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 8459
  • Thank you received: 1039
  • Karma: 156
@ jonone
There is a pad on the PWR-ICE which is an analog pad with some jumpers. Please check out the user manual.
Apart from that, you also have the PWR-ICE software where you can add compressor limiter together with simple gain control.

MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Moderators: devteam