Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Wrong tech spec for PWR ICE 125 & 250

Wrong tech spec for PWR ICE 125 & 250 5 months 2 days ago #26367

  • Fabri
  • Fabri's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 7
  • Karma: 0
Hello,

I've checked the dimensional technical specification on minidsp site for the items above, probably there is an error because the plate dimension is exactly the same 153 x 216mm but from the picture the 250 seems to be 50mm more.
Could you please check the drawings and give me some feedback?

Thanks
The administrator has disabled public write access.

Wrong tech spec for PWR ICE 125 & 250 5 months 1 day ago #26368

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2286
  • Thank you received: 861
  • Karma: 99
According to the ICE-PWR250 web page and the user manual it is 267mm high.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

Wrong tech spec for PWR ICE 125 & 250 5 months 1 day ago #26369

  • Fabri
  • Fabri's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 7
  • Karma: 0
Thanks john! now is ok!
The administrator has disabled public write access.

Wrong tech spec for PWR ICE 125 & 250 5 months 1 day ago #26387

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 5123
  • Thank you received: 632
  • Karma: 119
Thanks for the warning Fabri! All updated now and sorry for this mishap from our web page, some typo...
The PDF datasheet is the reference.

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.137 seconds