Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: PWR ICE - 125wd

PWR ICE - 125wd 2 years 3 weeks ago #16493

  • murray
  • murray's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 16
  • Karma: 0
You mention you can use it bridged, 1x450w - i.e balanced mode - how does this work as you only have unbalanced inputs? I thought you needed to use a balanced input (+,S,-) to use the ICE module in balanced mode..but you only have unbalanced inputs.
The administrator has disabled public write access.

PWR ICE - 125wd 2 years 3 weeks ago #16505

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5123
  • Thank you received: 632
  • Karma: 119
Hello Murray,

Good question. :-) We're unbalanced input indeed but that input connector is indeed a buffered board with opamps + few jumpers.
We do the buffering (i.e. levels) and inversion in this case to get a balanced signal. Makes sense?

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

PWR ICE - 125wd 2 years 3 weeks ago #16532

  • murray
  • murray's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 16
  • Karma: 0
Yes I understand, thanks for the clarification;
The administrator has disabled public write access.

PWR ICE - 125wd 2 years 2 weeks ago #16544

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5123
  • Thank you received: 632
  • Karma: 119
Glad we could help! :-)
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.101 seconds