Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: FIR Filters saved and loaded with configurations?

FIR Filters saved and loaded with configurations? 10 months 1 week ago #39143

  • Leif
  • Leif's Avatar
  • Offline
  • Junior Boarder
  • Posts: 27
  • Thank you received: 1
  • Karma: 0
Hello!

I hope this question had not been answered already, I could not find it through the search.

I am online on a DSP "A" and sent an FIR filter to the DSP using miniSHARC 4x8 plugin. After this I save the configuration
on my computer. Now I plug a DSP "B" to this computer, open the saved configuration and load the complete configuration
to DSP "B".

Is the FIR filter by this way in the DSP "B" ? Or do I have to manually sent the FIR to DSP "B" when being online as well?

Thank you!
The administrator has disabled public write access.

FIR Filters saved and loaded with configurations? 10 months 6 days ago #39147

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3458
  • Thank you received: 1486
  • Karma: 136
Sure, the FIR filter is saved in the config.

Idea: You can test for yourself by just loading the config into a different slot on the DSP "A".
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
Last Edit: 10 months 6 days ago by john.reekie.
The administrator has disabled public write access.
The following user(s) said Thank You: devteam
Moderators: devteam