Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: OpenDRC-DA8 issues

OpenDRC-DA8 issues 2 years 3 months ago #32506

  • insider9
  • insider9's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 16
  • Karma: 0
Hi,
Yesterday I've used my OpenDRC-DA8 first time in a week and no sound came out of any of the speakers. No settings have been changed. It's the same on all the profiles.. The plug in seems to show everything as it should but randomly disconnects with "Connection to DSP closed" message. It also has random problems reconnecting. I've done a factory reset but all the above issues are still present. None of the channels are muted, FIR is bypassed if not in use and volumes including master volume are set to normal. Can anyone please advise what's happening? What else should I try?
Thanks
The administrator has disabled public write access.

OpenDRC-DA8 issues 2 years 3 months ago #32510

  • dreite
  • dreite's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 1270
  • Thank you received: 630
  • Karma: 82
Did you power cycle the unit???

Dave.
The administrator has disabled public write access.
The following user(s) said Thank You: insider9

OpenDRC-DA8 issues 2 years 3 months ago #32511

  • insider9
  • insider9's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 16
  • Karma: 0
No, I have not. Will try tomorrow afternoon. Thanks
The administrator has disabled public write access.

OpenDRC-DA8 issues 2 years 3 months ago #32522

  • Draki
  • Draki's Avatar
  • Offline
  • Junior Boarder
  • Posts: 22
  • Thank you received: 4
  • Karma: 0
Any update on what happened after the re-powering ?
The administrator has disabled public write access.

OpenDRC-DA8 issues 2 years 3 months ago #32523

  • insider9
  • insider9's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 16
  • Karma: 0
I've been quite busy and not had a chance to do anything. I'm off tomorrow so will update. Fingers crossed
The administrator has disabled public write access.

OpenDRC-DA8 issues 2 years 3 months ago #32536

  • insider9
  • insider9's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 16
  • Karma: 0
Ok, I have power cycled the unit . Unfortunately there has been no difference to the issue. I still get no sound coming out of it.

Does anyone have any other idea, please?
The administrator has disabled public write access.

OpenDRC-DA8 issues 2 years 3 months ago #32702

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 8533
  • Thank you received: 1052
  • Karma: 157
@insider9,

Not sure what could be the reason here. Easiest would be to start a tech support ticket with our team (support.minidsp.com). I'm sure that they will be able to help.

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Moderators: devteam