Welcome, Guest

NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community.

TOPIC: Does it work right out of the box? I get no Video

Does it work right out of the box? I get no Video 4 years 11 months ago #12920

steven2583a
Offline
Fresh Boarder
Posts: 11
Karma: 0

I hooked the nanoAVR to my blue ray player and Anthem d2 sound processor. It has HDMI 1.3a. I expected it to pass through a video signal and audio signal right out of the box. I'm getting nothing. I'm on config 1. I set it to HDMI1. It was originally on HDMI2. I switch the cables but still nothing. I upgraded the device with the latest firmware but still nothing. Do I need to configure something before I get a picture? Anyone else having this type of problem?

The administrator has disabled public write access.

Does it work right out of the box? I get no Video 4 years 11 months ago #12924

john.reekie Offline Platinum Boarder Posts: 3263 Thank you received: 1403 Karma: 131	HDMI seems to be a bit tricky at times. Might be best to look at the User Manual? It's linked from the product page: www.minidsp.com/images/documents/nanoAVR%20User%20Manual.pdf
	I am not* miniDSP support.* "You must ask the right questions." - Dr. Alfred Lanning's hologram. -> Have you read the User Manual?? -> Have you drawn and posted a diagram? -> Have you posted a screenshot? -> Have you posted your config file? The administrator has disabled public write access.

Does it work right out of the box? I get no Video 4 years 11 months ago #12929

steven2583a
Offline
Fresh Boarder
Posts: 11
Karma: 0

I looked at the manual. I didn't see anything specific about video besides selecting the HDMI. I moved it to a simpler configuration and I wasn't getting a picture. Then the screen flashed and I got video. Not sure what it was but there isn't much to change. I see audio coming in but I don't hear audio going out. It's not on mute. Trying to figure out the master volume. The manual only talks about the remote. It is showing 0 DB in the Plug-in. Do I need to apply something to get audio?

The administrator has disabled public write access.

Does it work right out of the box? I get no Video 4 years 11 months ago #12930

steven2583a
Offline
Fresh Boarder
Posts: 11
Karma: 0

Well I moved it down into my main system and now I'm getting audio and video. I wasn't getting video earlier. I really didn't change anything. So going from my DirecTV DVR to the nanoAVR to my Panasonic TV model TC- P46530 I don't get any audio. Downstairs from my OPPO 93 to nanoAVR to Anthem D2v to Panasonic ZT60 TV I get audio and video. Looks like there needs to be a little work on the EDID and HDMI handshaking. The video blinks on and off a couple times in 10 minutes.

The administrator has disabled public write access.

Does it work right out of the box? I get no Video 4 years 11 months ago #12935

john.reekie Offline Platinum Boarder Posts: 3263 Thank you received: 1403 Karma: 131	steven2583a wrote: going from my DirecTV DVR to the nanoAVR to my Panasonic TV model TC- P46530 I don't get any audio. Hi again, I suspect that may be because the TV only supports 48 kHz (HDMI basic audio), whereas the nanoAVR will always output at 96 kHz.
	I am not* miniDSP support.* "You must ask the right questions." - Dr. Alfred Lanning's hologram. -> Have you read the User Manual?? -> Have you drawn and posted a diagram? -> Have you posted a screenshot? -> Have you posted your config file? Last Edit: 4 years 11 months ago by john.reekie. The administrator has disabled public write access.

Does it work right out of the box? I get no Video 4 years 11 months ago #12937

steven2583a Offline Fresh Boarder Posts: 11 Karma: 0	I didn't realize it upgraded all formats to 24/96 even if no processing is done on the data. I figured only if the audio stream was altered it would go to 24/96. Hopefully they can program a bypass to altering the data stream if no DSP changes are requested in the future.
	The administrator has disabled public write access.

Re:Re: Does it work right out of the box? I get no Video 4 years 11 months ago #12944

orangeart Offline Gold Boarder Posts: 181 Thank you received: 17 Karma: 6	They won't be able to do that, the plugin is 96khz and operates only in that clock domain. Its the same for all the sharc based products them make. Stefan Sent from my HTC One X using Tapatalk 2
	The administrator has disabled public write access.

Moderators: devteam

Forum

Community Support

nanoAVR

Does it work right out of the box? I get no Video

Time to create page: 0.123 seconds