Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: Nanoavr HD with 2x4

Nanoavr HD regrets... 1 year 1 month ago #38289

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3481
  • Thank you received: 1499
  • Karma: 137
jaz wrote:
Could you show me a config on how I should be doing the LFE Mgt?

This is all getting too much. I might just sell the unit.

[Edited] If you are doing bass management in the AVR, just turn on the routing from LFE In to Sub Out, and turn off the routing from LFE Mgt to Sub Out.

If you are doing bass management in the nanoAVR, you had a suitable config back in post #38250.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
Last Edit: 1 year 1 month ago by john.reekie.
The administrator has disabled public write access.

Nanoavr HD regrets... 1 year 1 month ago #38292

  • jaz
  • jaz's Avatar
  • Offline
  • Senior Boarder
  • Posts: 40
  • Karma: 0
Yes, all I wanted was to leave the bass management to be handled by the AVR. Thank you for that.

I officially declare myself a newbie.
The administrator has disabled public write access.

Nanoavr HD regrets... 1 year 1 month ago #38293

  • jaz
  • jaz's Avatar
  • Offline
  • Senior Boarder
  • Posts: 40
  • Karma: 0
With the bass managed by the AVR i should set the speakers back to small, right? Then I can peq the 5.0 speakers as normal and sort out my bass issues separately in regards to the 2x4? If that's the case then things just got lot easier for me.
The administrator has disabled public write access.

Nanoavr HD regrets... 1 year 1 month ago #38344

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3481
  • Thank you received: 1499
  • Karma: 137
Yes and yes :)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
Moderators: devteam