Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: NanoAVR HDA : output channel, need name mapping ?

NanoAVR HDA : output channel, need name mapping ? 4 months 2 weeks ago #37785

  • gug42
  • gug42's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 12
  • Thank you received: 3
  • Karma: 0
Hello Evryone,

I juste receive my minidsp nanoAVR HDA. Hope it will do the work I presume it can do :)

Ok I'm reading the doc, Install the app and look at the back of the boxe ...
First question : How did I know wich channel go where
In the application : FL out, FR out, sub out, etc.. but at the back of the boxe, out 1, out 2, out 3, etc.... :huh:

Thank you in advance
The administrator has disabled public write access.

NanoAVR HDA : output channel, need name mapping ? 4 months 2 weeks ago #37786

  • gug42
  • gug42's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 12
  • Thank you received: 3
  • Karma: 0
Hello,

In the output tabs, when I click Xover, the name is "out ch1" is cheked, so I will assume this is the mapping :)

Regards,
The administrator has disabled public write access.

NanoAVR HDA : output channel, need name mapping ? 4 months 2 weeks ago #37789

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3193
  • Thank you received: 1375
  • Karma: 129
When you click on Outputs the labels are along the top (or at least, they used to be, don't have a computer with the software installed on it with me at the moment)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

NanoAVR HDA : output channel, need name mapping ? 4 months 2 weeks ago #37816

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 7931
  • Thank you received: 927
  • Karma: 149
John is correct. Output label editing in done on the INPUT and OUTPUT tabs. it carries over to the matrix.

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

NanoAVR HDA : output channel, need name mapping ? 4 months 2 weeks ago #37818

  • gug42
  • gug42's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 12
  • Thank you received: 3
  • Karma: 0
Hello,

Thank you to have take time to answer my question.
My question was more about output mapping between the software and the hardware, and I found this information in xover tab.
No probleme to rename in the software.

Regards,
The administrator has disabled public write access.
The following user(s) said Thank You: devteam
Moderators: devteam
Time to create page: 0.127 seconds