Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: system configuration setting

system configuration setting 2 years 6 months ago #37458

  • mccoysmith
  • mccoysmith's Avatar
  • Offline
  • Junior Boarder
  • Posts: 32
  • Thank you received: 2
  • Karma: 0
I have an Emotiva UMC-200 pre-pro and using a nanoAVR DL. The nanoAVR is before the pre-pro in the signal chain.
Should the nanoAVR DL system configuration be set at 7.1 or custom to deal with the LFE gain alignment? With the DDRC-88A, it is recommended that it be set to custom for my type of set-up (7.1 with pre-pro feeding amps). Should it be the same for the nanoAVR DL?

The administrator has disabled public write access.

system configuration setting 2 years 6 months ago #37466

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3775
  • Thank you received: 1588
  • Karma: 140
No, it's different. The nanoAVR DL should use the 7.1 configuration because then Dirac Live will calibrate for the 10 dB alignment gain. With the DDRC-88A you want Dirac Live to calibrate for equal gain and the 10 dB gain is done in the AVR/processor that comes before it in the chain (well it doesn't have to be that way but it's the usual way).
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam
Moderators: devteam