Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: nanoAVR DL Latency

nanoAVR DL Latency 3 months 3 weeks ago #34800

  • mcdansley
  • mcdansley's Avatar
  • Offline
  • Junior Boarder
  • Posts: 24
  • Thank you received: 2
  • Karma: 0
The FAQ's on Minidsp's site says that the latency of the nanoAVR DL is 26 ms. Is this a mistake and should it correctly be 2.6 ms?
26 ms converts to a distance of approx. 23 ft. The nanoAVR HD is listed with a latency of 3 ms. Any replies are appreciated. See link below.

support.minidsp.com/customer/portal/arti...-a-nanoavr-dl-or-hd-

Thanks
Last Edit: 3 months 3 weeks ago by mcdansley.
The administrator has disabled public write access.

nanoAVR DL Latency 3 months 3 weeks ago #34815

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3061
  • Thank you received: 1303
  • Karma: 126
Hi, the latency for the Dirac Live version is due to the FIR filtering that Dirac Live does. It's not for distance correction.

I thought it was lower than that (DDRC-88A is 13 ms) but have never measured it on the nano.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: mcdansley

nanoAVR DL Latency 3 months 3 weeks ago #34883

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 7306
  • Thank you received: 817
  • Karma: 143
Indeed, something to be double checked by our team. I think that it should be 13mS and not 26mS. Only 96k platforms are 26mS. The nanoAVR DL is most likely 13mS.

Devteam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
The following user(s) said Thank You: mcdansley
Time to create page: 0.215 seconds