Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: nanoAVR-HD bass management for 2.0 does nothing

nanoAVR-HD bass management for 2.0 does nothing 10 months 3 days ago #29974

  • Tch0rT
  • Tch0rT's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 8
  • Thank you received: 3
  • Karma: 0
I have the latest plug-in and firmware (nanoAVR_BM_110.zip) installed on my nanoAVR-HD and bass management does not appear to work on 2.0 sources. I setup bass management just like in the guide here: www.minidsp.com/applications/home-theate...ning/bass-management

In the plug in I can see the VU lights whatever light up and bounce but nothing is output to my sub. I mainly use JRiver and I have to tell JRiver to either output 2.1 instead of 2.0 (or 7.1 with output on stereo sources as 2.1) for it the sub to even work.

Anyone have any ideas?
The administrator has disabled public write access.

nanoAVR-HD bass management for 2.0 does nothing 10 months 2 days ago #29975

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2816
  • Thank you received: 1186
  • Karma: 119
My guess is your HDMI output channel mode is set to Auto. Set it to 5.1 or 7.1 and see if that works :)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: Tch0rT

nanoAVR-HD bass management for 2.0 does nothing 10 months 2 days ago #29976

  • Tch0rT
  • Tch0rT's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 8
  • Thank you received: 3
  • Karma: 0
That did the trick! Thanks! :cheer:
The administrator has disabled public write access.
The following user(s) said Thank You: devteam, john.reekie
Time to create page: 0.113 seconds