Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: HDA / DLA center routing

HDA / DLA center routing 8 months 4 days ago #29434

  • weber30
  • weber30's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
This might be a very silly newbie question but I recently bought a nanoavr HDA and plan to upgrade it to a DLA. I want to use only four speakers (FL,FR, plus 2 surrounds) and no sub. The channels will run via two separate amps (using the analog outs) without any AV functionality. Does Dirac or the general nanoavr plugin allow me to split the sound of the center to the FL and FR channels so that I don't need to buy an extra center?
The administrator has disabled public write access.

HDA / DLA center routing 8 months 3 days ago #29445

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2690
  • Thank you received: 1099
  • Karma: 111
My understanding is that you cannot upgrade the HDA to "DLA".

At any rate, even if you could, there is no routing in the Dirac Live version. It's just 1-1.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

HDA / DLA center routing 7 months 3 weeks ago #29571

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5759
  • Thank you received: 705
  • Karma: 132
John is indeed correct. You can't upgrade to DLA I'm afraid (no firmware/software support for miniDAC8 on the Dirac build).
maybe in the future, we could see if that's possible or not..

MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.116 seconds