Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: REW on laptop >>> nanoAVR HD using HDMI 2.0 ?

REW on laptop >>> nanoAVR HD using HDMI 2.0 ? 4 months 2 weeks ago #26669

  • XBR11
  • XBR11's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
Normally to use the nanoAVR, you would use its HDMI in. Got it.

But if I use its USB 2.0 in, will I get the exact same functionality?

My laptop does NOT have a HDMI port.
I want to use REW on the laptop,
I want to connect to the AVR through the nanoAVR, rather than using the laptop's headphone out jack to the AVR's audio in.

So I what want to do is:
REW on laptop.
Laptop: USB >>> nanoAVR HD: USB 2.0
nanoAVR: HDMI>>>AVR: HDMI

Will this work?

It is not covered in the nanoAVR HD User Manual.
The administrator has disabled public write access.

REW on laptop >>> nanoAVR HD using HDMI 2.0 ? 4 months 2 weeks ago #26670

  • XBR11
  • XBR11's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
I found out that I have USB 2.0 on my laptop (which is maybe 10 years old) and at that time 2.0 USB had the USB 1.1 audio standards. I don't know nothing about what USB 1.1 audio means.

So knowing the above, can I successfully use REW on my laptop and output via my USB 2.0 (1.1 audio) to the nanoAVR HD USB 2.0 in (and the REW control I want?
The administrator has disabled public write access.

REW on laptop >>> nanoAVR HD using HDMI 2.0 ? 4 months 2 weeks ago #26671

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2287
  • Thank you received: 863
  • Karma: 99
Hi, the USB port on the nanoAVR HD is for control only (not audio).
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

REW on laptop >>> nanoAVR HD using HDMI 2.0 ? 4 months 1 week ago #26748

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5132
  • Thank you received: 632
  • Karma: 119
@ XBR11

Make sure that you read the user manual for the nanoAVR in details. As John is pointing out, the USB port is only for control. No streaming of audio. We don't have a USB to HDMI platform I'm afraid.. :-(

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.366 seconds