Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Using the nano avr hda as an active crossover 2.0

Using the nano avr hda as an active crossover 2.0 10 months 1 week ago #23314

  • Woosey
  • Woosey's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 10
  • Thank you received: 5
  • Karma: 1
I'm really wondering if I could use this device to run an "active" stereo setup.

What I think I can do with it, but I would like confirmation please,

I want to connect my dreambox ( this is also my mediaplayer ) and a BD player to my receiver with the nano avr hda as crossover, usin the analog outputs to my multichannel input of my receiver ( Sony QS )

Can I route the inputs left and right to lf+lb / rf+rb, and use the outputs on my amplifier for each individual driver? Like lf=left woofer lb=left tweeter

Basically what the car dsp is used for, but now in home with hdmi as input signal ( does it accept stereo input signal over hdmi? )

Thanks! :D
The administrator has disabled public write access.

Using the nano avr hda as an active crossover 2.0 10 months 1 week ago #23318

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2279
  • Thank you received: 853
  • Karma: 99
Hi, if you search the forum for "gonzo" you should turn up an active crossover project using nanoAVRs (using HDMI inputs of the AVR).
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam, Woosey

Using the nano avr hda as an active crossover 2.0 10 months 1 week ago #23320

  • Woosey
  • Woosey's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 10
  • Thank you received: 5
  • Karma: 1
This is awesome! whoohooo!! exactly like how I thought it would work..

Thanks for the heads up! :D
The administrator has disabled public write access.

Using the nano avr hda as an active crossover 2.0 10 months 10 hours ago #23427

  • smygolf
  • smygolf's Avatar
  • Offline
  • Junior Boarder
  • Posts: 23
  • Thank you received: 3
  • Karma: 4
I only use 5,1, so im rerouting L/R to the channals i dont use and let them take my tweeters.
So as a digital filter Nano Works Great and sounds way better then an active filter
Now im waiting for Nano wit +11 channals so i can do the same thing with my center
The administrator has disabled public write access.
Time to create page: 0.108 seconds