Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Forum
Community Support
nanoAVR
Will the nanoAVR hda do this?
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Will the nanoAVR hda do this?

Will the nanoAVR hda do this? 2 years 8 months ago #22322

  • lbunting
  • lbunting's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 12
  • Karma: 0
Hello,

Considering nanoavr hda- few questions if anyone can help:

-I have a home office that has two separate speaker System (floorstandings and desktop monitors) but only one sub. My source is an oppo Blu-ray player. plan is to connect the nano AVR HDA output as such: connect RCA 1 left channel floor standing, RCA 2 to right channel floor standing, RCA three to monitor left, RCA four to monitor right, and RCA 5 to subwoofer. In this situation could I have one config file that has floorstanding outputs active and a sub equalization file, and a second config file that has the monitors active with the sub and a different config file?

-Can you still use room equalizer wizard to Output your filters, like I did with my mini DSP?

-I noticed you can do volume control on this unit – does it work smoothly? Does
it add any noise/compression? If it works well I can ditch my preamp.

-Any concerns about this products for 2.1 channel audio?

Thanks, Leo

Thanks, Leo
The administrator has disabled public write access.

Will the nanoAVR hda do this? 2 years 8 months ago #22324

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3106
  • Thank you received: 1338
  • Karma: 127
Interesting idea. I can't think of any reason why that wouldn't work fine.

With the Oppo you should be able to run it in split output mode. Be aware that if you connect your computer to the nanoAVR, the computer will think it has an external display connected (my Mac does anyway).

HTH
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam
Forum
Community Support
nanoAVR
Will the nanoAVR hda do this?
Time to create page: 0.092 seconds