Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: NanoAVR DL

NanoAVR DL 1 year 3 weeks ago #22064

  • Paulkouhan
  • Paulkouhan's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
Hello,

I use a NanoAVR HD to mix the 5.1 LPCM audio from my OPPO 103d to 2.0 LPCM and then feed a nanoDIGI and 2 full digital amps.
(between the NanoAVR and the NanoDIGI I use a HDMI to SPDIFF Converter)

I am interested in the Dirac Live treatment.

If I upgrade my NanoAVR HD to NanoAVR DL, will the features of the NanoAVR HD still active ?

Does the NanoAVR DL can make Channel routing ?
Does the NanoAVR DL adds the direct Live feature to the NanoAVR HD OR is it a complete different unit ?

thanks,

David
The administrator has disabled public write access.

NanoAVR DL 1 year 3 weeks ago #22091

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 5108
  • Thank you received: 631
  • Karma: 119
@ David,

In answer to your question, I'm afraid that it will be a complete different unit that will be 1 to 1 routing. There won't be any matrixing inside able to help you achieve that 5.1 to 2.0 setup I'm afraid. :-(

Getting a DDRC-22D in the path of the SPDIF would be your only way here..

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

NanoAVR DL 1 year 3 weeks ago #22096

  • Paulkouhan
  • Paulkouhan's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
Hello,

It may be an improvement to add this routing feature in the nanoAVR DL.
You may suggest it to the dirac team...

I can also add a nanoAVR DL just after my nanoAVR HD instead of a DDRC 22 D.
Are the 2 units (nanoAVR DL and DDRC 22D) using the same hardware ?

Thanks,

David
The administrator has disabled public write access.

NanoAVR DL 1 year 3 weeks ago #22099

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2284
  • Thank you received: 859
  • Karma: 99
I'm not minDSP/devteam but FWIW I believe the nanoAVR DL and nanoAVR HD use the same hardware. AFAIK the difference in cost is due to Dirac licensing.

If you have both units, you can connect them in series. (I do.)


Sorry, I am deleting my response as I didn't read the question correctly. The nanoAVR DL and DDRC-22D do NOT use the same hardware.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
Last Edit: 1 year 3 weeks ago by john.reekie.
The administrator has disabled public write access.
The following user(s) said Thank You: devteam
Time to create page: 0.119 seconds